Khóa cửa MGB-L1B-PNC-R-115619 (Euchner 115619)

Thông số kỹ thuật khóa cửa Euchner MGB-L1B-PNC-R-115619 (Order no. 115619)

đại lý euchner | đại lý MGB-L1B-PNC-R-115619 | đại lý 115619

nhà phân phối euchner | nhà phân phối MGB-L1B-PNC-R-115619 | euchner 115619

Secured switch-off distance sar
Door position	max. 65 mm

Operating and display elements

Occupancy diagram
	L0
	B3

Item	Extras	Color	Designation1	Number	LED	Note slide-in label	Slide-in label	Version	Switching element
7	with adhesive ring							Emergency stop illuminated	2 PD
8		white						Illuminated pushbutton	1NO
9		white						Illuminated pushbutton	1NO

Giá trị kết nối điện

Connecting cable
Ethernet	Profinet I/O cable, at le cat. 5e
Điện áp cách điện định mức Ui	75 V
Điện áp chịu xung định mức Uimp	0.5 kV
EMC yêu cầu bảo vệ	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Cấp an toàn	III
Mức tiêu thụ dòng điện	max. 500 mA
Transponder coding	Multicode
Mức độ ô nhiễm (external, according to EN 60947-1)	3
	Power supply X1
Cầu chì
external	min. 1 A slow blow
Điện áp hoạt động DC
L1	24 V DC -15% … +10% ((reverse polarity protected, regulated, residual ripple
Auxiliary voltage DC
L2	24 V DC -15% … +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Điện áp hoạt động DC
L1	24 V DC -15% … +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% … +10% (For looping through for connected devices)

Kết nối type
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at le cat. 5e	Push-pull RJ45 (X3 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
	Push-pull power (X2 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at le cat. 5e	Push-pull RJ45 (X4 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
	Push-pull power (X1 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
Định hướng cài đặt	Door hinge DIN right
chuyển đổi	0.25 Hz
Tuổi thọ cơ học
in case of use as door stop, and 1 Joule impact energy	0.1 x 10⁶
	1 x 10⁶
Thời gian đáp ứng
Guard locking	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Door position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Emergency stop / machine stop	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max. 550 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Chống sốc và rung	Acc. to EN IEC 60947-5-3
Cấp bảo vệ	IP54
Nhiệt độ môi trường
at UB = 24 V DC	-20 … +55 °C
Material
Thân	Fiber glass reinforced plic, nickel-plated die-c zinc, stainless steel
Lực khóa FZh	2000 N
Nguyên tắc khóa bảo vệ	Closed-circuit current principle

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Thời gian trễ	20 y
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Control of guard locking
Category	4
Mức hiệu suất	PL e
PFHD	3.91 x 10-8
	Emergency stop
B10D
Emergency stop	0.13 x 10⁶
	Emergency-stop evaluation
Category	4
Mức hiệu suất	PL e
PFHD	4.1 x 10-8
	Monitoring of guard locking and the guard position
Diagnostic Coverage (DC)	99 %
Category	4
Mức hiệu suất	PL e
PFHD	4.07 x 10-8(Fixed failure rate without consideration of faults in wearing parts.)

Slide-in label
Number Labeling Note 2 without marking L Ein Start Station Anforderung Zutritt Quitt. Start Station Quittieren Anforderung
Product version number	V3.30.10

Interface

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet