Công tắc an toàn CET3-AS-CRA-AB-50X-SJ-AS1-111214 (Euchner 111214)
Thông số kỹ thuật công tắc an toàn Euchner CET3-AS-CRA-AB-50X-SJ-AS1-111214 (Order no. 111214)
đại lý euchner | đại lý CET3-AS-CRA-AB-50X-SJ-AS1-111214 | đại lý 111214
nhà phân phối euchner | nhà phân phối CET3-AS-CRA-AB-50X-SJ-AS1-111214 | euchner 111214
Giá trị kết nối điện
| ASI address | 0 |
| ASI operating current | 50 mA |
| ASI data in | |
| according to AS-i Safety at Work | D1 (Door position) |
| according to AS-i Safety at Work | D3 (Guard locking) |
| according to AS-i Safety at Work | D0 (Door position) |
| according to AS-i Safety at Work | D2 (Guard locking) |
| ASI data out | |
| LED green | D2 (1 = LED on) |
| LED red | D1 (1 = LED on) |
| Guard locking solenoid | D0 (1 = Solenoid energized) |
| ASI auxiliary voltage | |
| IEC 60742, PELV | 24 V -15% … +10% |
| ASI auxiliary current | 480 mA |
| ASI-LED | |
| LED green | Power (ASI voltage present) |
| LED red | Fault (Offline phase or address 0) |
| ASI slave type | |
| according to ASI specification 2.1 | ID code: B |
| according to ASI specification 2.1 | EA code: 7 |
| ASI voltage | 22.5 … 30 … 31.6 V |
| Cấp an toàn | |
| EN IEC 61140 | III |
| Mức độ ô nhiễm (external, according to EN 60947-1) | 3 |
| Tốc độ tiếp cận | max. 20 m/min |
| Kết nối type | |
| 1 x | Plug connector M12 (4-pin) |
| Định hướng cài đặt | any (preferably head downward) |
| chuyển đổi | max. 0.5 Hz |
| Degree of freedom X | ±5 mm |
| Degree of freedom Y | ±5 mm |
| Degree of freedom Z | ±4 mm |
| Tuổi thọ cơ học | 2 x 10⁶ |
| Chống sốc và rung | Acc. to EN IEC 60947-5-3 |
| Cấp bảo vệ | IP67 (screwed tight plug connector/mating component) |
| Nhiệt độ môi trường | |
| at UB = 24 V DC | -20 … +55 °C |
| Material | |
| Ramp | Stainless steel |
| Safety switch housing | Die-c aluminum |
| Lực khóa Fmax | 6500 N |
| Lực khóa FZh | 5000 N (FZH = FMAX/1.3) |
| Nguyên tắc khóa bảo vệ | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Thời gian trễ | 20 y |
| Control of guard locking | |
| Category | |
| Any installation orientation | B |
| Mức hiệu suất | PL b |
| PFHD | |
| Any installation orientation | 4.23 x 10-6 |
| Monitoring of guard locking and the guard position | |
| Category | |
| Any installation orientation | 4 |
| Mức hiệu suất | PL e |
| PFHD | |
| Any installation orientation | 3.1 x 10-9 |
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |



