Khóa cửa MGB-CB-PN-114744 (Euchner 114744)

Thông số kỹ thuật khóa cửa Euchner MGB-CB-PN-114744 (Order no. 114744)

đại lý euchner | đại lý MGB-CB-PN-114744 | đại lý 114744

nhà phân phối euchner | nhà phân phối MGB-CB-PN-114744 | euchner 114744

Operating and display elements

Occupancy diagram
	B1
	C1

Item	Extras	Color	Designation1	Number	LED	Note slide-in label	Slide-in label	Version	Switching element
10		white						Illuminated pushbutton	1NO
11		white						Illuminated pushbutton	1NO
12		white						Illuminated pushbutton	1NO
13		white						Illuminated pushbutton	1NO
14								Selector switch, illuminated	2NO
15								Selector switch, illuminated	2NO
16								Selector switch, illuminated	2NO
17								Selector switch, illuminated	2NO
90		white						Illuminated pushbutton	1NO
91		white						Illuminated pushbutton	1NO
93								Emergency stop	2 PD
94								Selector switch, illuminated	2NO
95								Selector switch, illuminated	2NO

Giá trị kết nối điện

Connecting cable
Ethernet	Profinet I/O cable, at le cat. 5e
Điện áp cách điện định mức Ui	75 V
Điện áp chịu xung định mức Uimp	0.5 kV
EMC yêu cầu bảo vệ	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Cấp an toàn	III
Mức tiêu thụ dòng điện	max. 500 mA
Mức độ ô nhiễm (external, according to EN 60947-1)	3
	Power supply X1
Cầu chì
external	min. 1 A slow blow
Điện áp hoạt động DC
L1	24 V DC -15% … +10% ((reverse polarity protected, regulated, residual ripple
Auxiliary voltage DC
L2	24 V DC -15% … +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Điện áp hoạt động DC
L1	24 V DC -15% … +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% … +10% (For looping through for connected devices)

Kết nối type
	Push-pull power (X1 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at le cat. 5e	Push-pull RJ45 (X3 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at le cat. 5e	Push-pull RJ45 (X4 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
	Push-pull power (X2 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
	Plug connector RC12 (X14)
	Plug connector M12 (X6)
Định hướng cài đặt	any
chuyển đổi	0.25 Hz
Thời gian đáp ứng
Enabling switch	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Emergency stop / machine stop	max. 250 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Chống sốc và rung	Acc. to EN IEC 60947-5-3
Cấp bảo vệ	IP54
Nhiệt độ môi trường
at UB = 24 V DC	-20 … +55 °C
Material
Thân	Fiber glass reinforced plic, nickel-plated die-c zinc, stainless steel

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Diagnostic Coverage (DC)	99 %
Thời gian trễ	20 y
Category	4
Mức hiệu suất	PL e
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Emergency stop
B10D
Emergency stop	0.13 x 10⁶
	Enabling switch
B10D
Enabling switch	(Acc. to manufacturer’s specifications)
	Emergency-stop evaluation
Category	4
Mức hiệu suất	PL e
PFHD	4.1 x 10-8
	Enabling switch evaluation
Category	4
Mức hiệu suất	PL e
PFHD	4.1 x 10-8

Slide-in label
Number Labeling Note 12 without marking Quittierungssymbol 1 Quittierungssymbol 2
Product version number	V3.30.10

Interface

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet