Khóa cửa MGB-B-A4W2A2-PN-157325 (Euchner 157325)

Thông số kỹ thuật khóa cửa Euchner MGB-B-A4W2A2-PN-157325 (Order no. 157325)

đại lý euchner | đại lý MGB-B-A4W2A2-PN-157325 | đại lý 157325

nhà phân phối euchner | nhà phân phối MGB-B-A4W2A2-PN-157325 | euchner 157325

Operating and display elements

Occupancy diagram

B4

Item	Extras	Color	Designation1	Number	LED	Note slide-in label	Switching element	Slide-in label	Version
90	printed	white					1NO		Illuminated pushbutton
91							Code 2 of 3	mit Symbolen	Operating mode selector
92	printed	Green					1NO		Illuminated pushbutton

Giá trị kết nối điện

Connecting cable
Ethernet	Profinet I/O cable, at le cat. 5e
Điện áp cách điện định mức Ui	75 V
Điện áp chịu xung định mức Uimp	0.5 kV
EMC yêu cầu bảo vệ	In accordance with EN 61000-4 and EN 61326-3-1
maximum feed-in current in the connection block
X1, X2	max. 4000 mA
Cấp an toàn	III
Mức tiêu thụ dòng điện	max. 500 mA
Mức độ ô nhiễm (external, according to EN 60947-1)	3
	Power supply X1
Cầu chì
external	min. 1 A slow blow
Điện áp hoạt động DC
L1	24 V DC -15% … +10% ((reverse polarity protected, regulated, residual ripple
Auxiliary voltage DC
L2	24 V DC -15% … +10% (The auxiliary voltage is not required for the MGB system)
	Power supply X2
Điện áp hoạt động DC
L1	24 V DC -15% … +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% … +10% (For looping through for connected devices)

Kết nối type
	Push-pull power (X2 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at le cat. 5e	Push-pull RJ45 (X3 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
according to IEC 61076-3-117, variant 14, screened, Profinet I/O cable, at le cat. 5e	Push-pull RJ45 (X4 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
	Push-pull power (X1 (The document PROFINET “Cabling and Interconnection Technology” from the PNO aids in the correct selection of cables.))
Định hướng cài đặt	any
chuyển đổi	0.25 Hz
Thời gian đáp ứng
Operating mode selector	max. 220 ms Turn-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Chống sốc và rung	Acc. to EN IEC 60947-5-3
Cấp bảo vệ	IP54
Nhiệt độ môi trường
at UB = 24 V DC	-20 … +55 °C
Material
Thân	Fiber glass reinforced plic, nickel-plated die-c zinc, stainless steel

Characteristic values according to EN ISO 13849-1 and EN IEC 62061

Diagnostic Coverage (DC)	99 %
Thời gian trễ	20 y
Category	4
Mức hiệu suất	PL e
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Evaluation of multi-position switch
Category	4
Mức hiệu suất	PL e
PFHD	4.1 x 10-8

Slide-in label
Number Labeling Note 2 without marking
Product version number	V3.30.10

Interface

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Date interface
Ethernet